Your Cart Is Empty.
This configuration is not available. Make another selection.
| 3 | Type Screw/Bolt | Hex Head |
| 19 | Material | Class 8.8 Steel |
| 20 | Finish | Zinc Plated |
| 21 | Length | 25mm |
| 23 | Threaded Length | 25mm |
| 24 | Unthreaded Length | 0mm |
| 31 | Drive Type | External Hex |
| 32 | Drive Size | 5.5mm Wrench |
| 37 | Head Height | 2mm |
| 42 | Bolts Profile | Normal |
| 44 | Thread Amount | Full Thread |
| 45 | Thread Direction | Right Hand |
| 56 | Measurement System | Metric |
| 169 | Diameter + Thread | M3X0.5 |
| 171 | Specification | DIN 933 |
| 999 | SKU | BR3X25CLZ |
| 999 | Long Form Diameter Thread | M3X0.5, M3X.5, M3, 3mm |
M3X0.5 DIN 933 8.8 Coarse Thread Hex Bolts
Class 8.8 metric hex bolts provide a medium strength, high tensile fastening solution. Pair with Class 8 or stronger nuts.
Hexagonal head bolts are one of the most commonly used fasteners, available in full thread or partial thread configurations.
Partially threaded hex bolts have an unthreaded length under the head that is stronger than the threaded portion of the bolt. The unthreaded / threaded length dimensions vary by specification.
Fully threaded hex bolts are often referred to as tap bolts, the entire length of the bolt is meant to engage with a tapped hole.
Hex bolts can be used with many different styles of locking and non-locking nuts, tightly clamping together whatever the bolt is being used to secure. A wrench is used to install and tighten hex bolts.
Also known as
Coarse thread hex cap screw, HHCS, hexagonal head screw, six sided head screw with machine thread, machine bolts.
Use
To be used with locking or non-locking nuts or in a tapped hole.
Special Order Variations
Need a bulk quantity of a length or finish combination not shown here? Shoot us an email!
Download CAD
| Download CAD | |